DT102 - 3.5mm + 1/4" Adaptor 400 ohm - Grey - Part No. 421.561
APPLICATIONS
The DT 100 headphone is widely used in audio recording and monitoring applications in studios worldwide. The DT 100 offers a high degree of wearing comfort and can be worn for hours without listener fatigue. The soft ear cushions effectively seal out ambient noise yet apply minimal pressure against the ear. The DT 102 is the identical headphone to the DT 100 with the exception that it is a single-ear headphone. The DT 102 is used in broadcast work, recording, TV studio and theater applications where the monitoring of outside ambient information is necessary.
TECHNICAL SPECIFICATIONS
Transducer type . . . . . . . . . . . . . . . . . . . Dynamic
Operating principle . . . . . . . . . . . . . . . . Closed
Frequency response . . . . . . . . . . . . . . . . 30 - 20,000 Hz
Nominal impedance. . . . . . . . . . . . . . . . 400ohm ± 10% per
Nominal SPL . . . . . . . . . . . . . . . . . . . . . 94 dB SPL
T.H.D. . . . . . . . . . . . . . . . . . . . . . . . . . . < 1%
Power handling capacity . . . . . . . . . . . . 1000 mW
(= 124 dB SPL)
Sound coupling to the ear . . . . . . . . . . . Circumaural
Average pressure on ears. . . . . . . . . . . . 4.5 N
Ambient noise isolation . . . . . . . . . . . . . 20 dB(A)
Weight (without cable) . . . . . . . . . . . . . DT 100: 350 g /
DT 102: 250 g
(all specifications according to EN 60268-7)
*other impedances available
OPTIONAL ACCESSORIES
K 100.00 Straight cable, 3 m long, bare-ended. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 101.170
K 100.07 Straight cable, 3 m long, with 3-pole 1/4" stereo jack plug (6.35 mm) . . . . . . . . . . . . . . . . . . Order # 101.753
WK 100.00 Coiled cable, 3 m long, bare-ended. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 101.788
WK 100.07 Coiled cable, 3 m long, with 3-pole 1/4" stereo jack plug (6.35 mm) . . . . . . . . . . . . . . . . . Order # 101.826
